DC power supply: DC 10~30V;

Power consumption: 0.3W;

Operating environment: -20℃~+60℃, 0%RH~80%RH

Communication interface: RS485; standard MODBUS-RTU protocol;

Communication baud rate: configurable to 2400, 4800, 9600;

Infrared port: Capable of learning 99% remote controls and successfully controlling air conditioners;

Support external infrared probe, with an infrared emission extension cable up to 5 meters long;

Support the detection of air conditioning operating status;

Through the accompanying software, 99.9% of air conditioning remote controls can be learned, with the ability to learn 23 sets of button functions. Equipped with a 485 interface, it can control air conditioning through the MODBUS-RTU protocol instead of using a remote control, and can perform batch testing and downloading of learning codes;

The ModBus communication address can be set, and the baud rate can be modified;

The RS-KTC-N01 device adopts a wide voltage supply, which can operate with DC voltages ranging from 10 to 30V;

The communication distance of the 485 communication line can reach up to 2000 meters;

Remotely control two air conditioners on one host computer;

Collect the temperature of the location where the air conditioning controller is remotely;

Remotely and regularly switch on/off the air conditioning;

Automatically switch on/off the air conditioning based on the set temperature lower and upper limits;

Control failure alarm and relay output;

Overtemperature and low temperature alarms, as well as relay output;

The device is equipped with a power-off protection function, which saves the set parameters in case of power loss;

Configure the automatic power-on function for air conditioning. After the air conditioning is powered off and then powered on again, the device automatically sends the "Custom Channel 20" command;

Support external infrared probes, with an infrared emission extension cable up to 5 meters long;

Support the detection of air conditioning operation status.